Stationery MOQ, Payment & FOB Terms
How stationery supplier MOQ, 30% T/T payment terms and FOB ports actually work — and how to structure your RFQ so quotes are comparable.
11/12/20265 min read
What MOQ actually means on a quotation
MOQ — minimum order quantity — is the first number on almost every stationery quotation, and the one buyers most often misread. It is not a marketing round number. It is the point below which the factory genuinely cannot run your order: below it, setup time, artwork preparation and line changeover cost more per unit than the product itself. When a supplier quotes an MOQ of 500 or 1,000 pieces, that figure is protecting both sides from an uneconomic production run.
On our own product pages the structure is stated plainly: stock designs from 500 pieces where no customisation applies, and customised programmes from 1,000 pieces per model. Two different MOQs, because they are two different jobs — one is picking a finished design off the shelf, the other is building your programme from scratch.
Why stock and custom MOQs differ
A stock order reuses existing tooling, existing materials and existing artwork. Nothing has to be created, so the only costs are production and packing. That is why 500 pieces works.
A custom programme is different. Your drawing has to be turned into print-ready artwork, the line has to be set up for your specification, and a sample has to be produced and approved before the full run starts. Those one-off costs are real whether you order 1,000 pieces or 10,000 — so they are spread across a higher minimum. Customised programmes start at 1,000 pieces per model and are quoted against your drawing.
If your quantities sit between the two tiers, ask two questions: what would the unit price be at 500 pieces of a stock design, and what would it be at 1,000 pieces with your artwork? The gap between those two numbers tells you exactly what your customisation costs per unit — and you can decide whether it is worth it at your volume.
How to read payment terms: 30% T/T, balance against B/L copy
The standard terms on our quotations are 30% T/T deposit, balance against B/L copy. In plain English:
The 30% T/T deposit is a telegraphic transfer — a bank wire — paid when the order is confirmed. It covers materials and production setup, and it commits the factory to your slot on the production line.
Balance against B/L copy means the remaining 70% is due when we send you a copy of the Bill of Lading — the shipping document proving your goods are loaded and consigned to you. In practice this protects you twice: the goods physically exist and have cleared export before the final payment is triggered.
Some suppliers ask for the full balance before production starts. That is not automatically suspicious in this industry, but it shifts all the risk to you. A deposit-plus-B/L structure is the more buyer-favourable arrangement, and it is what we quote as standard.
FOB ports and what they change in your quote
We quote FOB Ningbo, Shanghai or Guangzhou. FOB — Free On Board — means the price includes everything up to the moment your goods are loaded onto the vessel: production, packing, inland transport to the port, and export clearance. Everything after that is yours to arrange: ocean freight, insurance, import duties and delivery to your door.
This matters when you compare quotes. A price quoted FOB Shanghai is not directly comparable to one quoted CIF your port or DDP your warehouse, because those include different cost layers. Always check which Incoterm a supplier is using before you compare unit prices — and if you are importing to a region where freight or duties are hard to predict, FOB gives you full control over that leg through your own forwarder.
Wenzhou sits between Ningbo and Shanghai, so either port is a short inland haul. We quote whichever suits your routing and freight rates at the time of order.
The numbers that make quotes comparable
If you send the same RFQ to three suppliers and get three quotes, they are only comparable if all of these are pinned down:
MOQ per model — not per order. A 3,000-piece order across three models is not 3,000 pieces of anything if each model's MOQ is 1,000.
Unit price at your exact quantity — a price at 10,000 pieces tells you nothing if you are buying 2,000.
Packaging specification — our standard is 1 piece per OPP bag, 80 pieces per carton. Carton dimensions and gross weight drive your freight cost, so they belong in the quote.
Print specification — 1–4 colours changes both the price and the MOQ.
Payment split and Incoterm — deposit percentage, balance trigger, and which port.
Lead time — quoted from artwork approval, not from order confirmation.
Ask every supplier to quote against the same list. The one who returns a complete answer is usually the one who has actually read your requirement.
How a custom programme runs, from drawing to shipment
So you know what happens after you send a drawing. Artwork comes first: compartment counts, index wording, closure type and print colours are all configured at the artwork stage, because everything downstream copies whatever is approved here. Then we sample on the production line before the run — not a handmade mock-up, a sample off the actual line that will produce your order.
Quality runs on four inspection gates per order, with records retained. Capacity is verified at QC with a loaded-sheet test on sampled units — an accordion organiser is physically loaded to its rated capacity before it ships. Third-party inspectors are welcome at any gate: SGS, BV, TÜV and Intertek all audit our orders regularly, and you can nominate any of them.
A quick RFQ checklist
Before you send your next enquiry, make sure it contains: the product type and size (A4 or Letter — see our sizing guide if you are between the two); quantity per model and per colour; whether designs are stock or custom; your artwork or a description of the print; packaging requirements; your target delivery date; and your destination port. The more of these you fix up front, the faster a real unit price comes back.
When you are ready, our request-a-quote page takes you straight to the team that answers RFQs, and our OEM & ODM services page explains what we can build from your drawing versus from our designs. To see the terms above in context, look at any product page — for example the A4 accordion file organiser or the lever arch file folder — and our quality & compliance page details the inspection regime.
Frequently asked questions
What is the MOQ for custom printed file folders?
Customised programmes start at 1,000 pieces per model, quoted against your drawing. The one-off artwork and line setup are spread across that minimum.
Can I order 500 pieces with my own logo?
The 500-piece minimum applies to stock designs where no customisation is involved. Once your artwork goes on the product, the minimum is 1,000 pieces per model.
What does "30% T/T deposit, balance against B/L copy" mean?
30% is wired when the order is confirmed; the remaining 70% is due when we send the Bill of Lading copy showing your goods are loaded. Your final payment follows physical shipment, not promises.
Which port do you ship from?
We quote FOB Ningbo, Shanghai or Guangzhou. Wenzhou sits between Ningbo and Shanghai, so we ship from whichever suits your routing and freight rates.
Can I inspect the goods before shipment?
Yes. Every order runs four inspection gates with records retained, and third-party inspectors — SGS, BV, TÜV, Intertek — are welcome at any gate. You can nominate your own.
My post content
Products Catagories
© 2010-2025 Wenzhou Kingone Industrial Limited. ALL RIGHTS RESERVED
Quality stationery products for your needs.


