A4 vs Letter File Folders: Sizing Guide
A4 vs Letter file folders: dimensions, market differences and what to specify in your RFQ — a sizing guide for B2B stationery buyers.
11/12/20264 min read
What A4 and Letter actually measure
A4 is the international paper standard at 210 × 297 mm, used across most of Europe, Asia, Africa and Oceania. Letter is the North American standard at 8.5 × 11 inches (216 × 279 mm), used in the United States, Canada and the markets that follow them. The two are close enough to look interchangeable and different enough to matter: A4 is 18 mm longer than Letter but 6 mm narrower. A folder cut for one will accept the other's sheets with unequal clearance — snug at the top, tight at the side, or the reverse.
Why the folder is never the size of the paper
A file folder is always larger than the sheet it carries — clearance on the width and depth so paper slides in without buckling and the fold closes flat. That is why buyers should think in paper size (what goes inside), not in the folder's outside dimension. A supplier quoting "330 × 240 mm" is describing the product, not the paper it serves. Our own 2-pocket PP file folder (KO-PFF055) illustrates the point: it is built to carry letter- and A4-size paperwork in the same pocket set, because the clearance works for both standards.
Which markets use which size
A4 is the default across most of the world and across our filing range. Letter is the standard in the US and Canada, and it travels with North American procurement programmes wherever they operate. FC (foolscap, 8.5 × 13 in) is the working size in the Philippines and parts of Southeast Asia, and A4/FC — longer than A4, shorter than full FC — appears where buyers need the extra length without the full footprint. Letter and FC sizes are produced on request: the 6-compartment organiser (KO-EP033), for example, lists A4/A5 with Letter on request, and the same applies across the pocket folder and expanding ranges.
How the difference shows up in real product specs
Read the size line on any spec sheet as the paper size the product is built around. The A4 accordion organiser (KO-DB067) holds up to 2,000 A4 sheets across 13 compartments — that capacity figure only holds if the sheets are A4. The 6-compartment organiser (KO-EP033) runs A4/A5 and expands from roughly 30 mm to 80 mm as files accumulate; the expansion is designed around the sheet stack, not the other way round. In lever arch files, the spine depth (51 mm and 75 mm in our range) sets the capacity, while the cover itself is cut to the paper standard. Mixing sizes inside one programme is workable, but each model is then quoted against its own size.
What to specify in your RFQ
Three things remove almost all sizing risk at quotation stage. First, the paper size — A4, Letter, FC or A5 — together with the market of end use, so we can confirm the default and flag anything unusual. Second, whether one programme mixes sizes: each model carries its own minimum, from 500 pcs for stock designs and from 1,000 pcs per model for customised work, quoted against your drawing. Third, the commercial frame — 30% T/T deposit with the balance against B/L copy, FOB Ningbo with Shanghai and Guangzhou available — so the size conversation and the terms conversation happen once. A drawing or physical reference settles size questions faster than any description; we do not quote customised items from a description alone.
Common sizing mistakes to avoid
Ordering by the folder's outside dimension instead of the paper size is the most common error, and it surfaces at the buyer's warehouse rather than at ours. Assuming one size fits all markets is the second: a US programme will not run happily on A4-cut folders. Third, label and tab positions shift with the size — a template that reads correctly on an A4 cover can land off-centre on Letter. Finally, not confirming the destination market before quoting: a one-line answer ("this ships to Germany" or "this is for a US school board") removes the ambiguity entirely.
Frequently asked questions
Can I order Letter size if A4 is your standard?
Yes. Letter is produced on request across the filing range. Confirm it at RFQ stage so tooling and print artwork are set up once, rather than re-cutting a size later.
Will an A4 folder hold Letter paper?
Usually yes on length — A4 is the longer sheet — but Letter is wider, so the side clearance depends on the model. Our 2-pocket folder (KO-PFF055) is built to carry both; for other models, send the paper size and we will confirm the fit.
What exactly is A4/FC?
A size between A4 and foolscap — longer than A4, shorter than full FC (8.5 × 13 in). It appears in markets that need the extra length without the full FC footprint, and it is produced on request like other non-standard sizes.
Does mixing sizes in one order affect the minimum order?
Each model carries its own MOQ — from 500 pcs for stock designs, from 1,000 pcs per model for customised work. Mixing sizes within one programme is workable, but the quantity is counted and quoted per model, not per shipment.
How do I know which size my market uses?
A4 covers most of the world; Letter covers the US and Canada; FC covers the Philippines and parts of Southeast Asia. Tell us your destination market and end customers, and we will confirm the default size before you commit to a programme.
Talk to us about your filing range
Send your paper size, target market and volume, and we will come back with the size-correct range, sample plan and quotation. Request a quote with your specification, or start from the file folder range and the 2-pocket folder and A4 accordion organiser referenced above.
My post content
Products Catagories
© 2010-2025 Wenzhou Kingone Industrial Limited. ALL RIGHTS RESERVED
Quality stationery products for your needs.


